Navigator LP 290BK 9.5’ + ThrustMe Kicker 2HP
Fishing Line bundle is an affordable Boat & ELECTRIC Motor Package which includes a 9.5-foot heat-welded inflatable boat Navigator LP 290BK made of one of the best PVC materials in the world - German Mehler Texnologies and ThrustMe Kicker 2HP electric motor that provides reliable and efficient power. The bundle comes with all the necessary accessories for a smooth, quiet, and hassle-free fishing experience.
An electric motor gives you a new experience of setting the trolling speed without recoil if needed. You can slowly cruise around the lake and fixate on the right angle to maneuver in a certain location without scaring the fish, producing smoke, or polluting the lake. You are also able to switch to the maximum speed of 2hp, allowing you to get back to the shore in a shorter time compared to classical trolling motors.
The bundle includes a 9.5-foot welded inflatable boat Navigator LP 290BK made of one of the best PVC materials in the world - German Mehler Texnologies and ThrustMe Kicker 2HP electric motor, lightweight engine with impressive efficiency. The bundle comes with all the necessary accessories for a smooth, quiet and hassle-free fishing experience.
- The Navigator LP 290BK inflatable boat is manufactured with European quality standards in mind.
The 3-Person boat is designed for maximum durability and performance, a U-shaped tube with a reinforced transom made of marine plywood, The minimum number of heat-welded joining seams decreases the risk of air leakage. The V-shaped keel bottom is designed to improve performance and minimize shock loads when navigating through waves.
The boat is constructed from top-grade German PVC Valmex or Plastel, manufactured by Mehler Technologies with a density of 750-1100 g/m2. With this level of quality, the Navigator boat can withstand long-term use without requiring any additional seam processing, therefore we provide 5 years warranty and if taken good care of the boats can last up to 15 years.
This type of model encompasses a lightweight book-type floor that remains sturdy and stable when placed in the boat due to its well-thought-out design. You can easily fold it up in a bag that is included with the floor.
- ThrustMe Kicker is an electric outboard motor that offers a clean, quiet, and efficient way to power small boats. It is manufactured by a Norwegian company. One of the key features of the ThrustMe Kicker is its compact size and lightweight design. It weighs only 5kg (11 lbs), making it easy to handle and install. It produces minimal noise and vibrations while in operation and doesn’t need any maintenance.
BOAT SPECIFICATIONS:
Brand, model: Navigator LP 290BK
Boat type: Roll-up Boat with an inflatable keel and a book-type floor
Body material: Valmex or Plastel PVC, Mehler Texnologies
Length overall: 9,51’ (290cm)
Length inside: 6,56’ (200cm)
Width overall: 4,86’ (148cm)
Width inside: 2,07’ (63cm)
Outer length: 9,51’ (290cm)
Outer width: 4.59’ (140cm)
Number of chambers: 3
Diameter of cylinders, mm: 380, (1,25’)
The density of the boat cylinder material, g / m2: 750
The density of the boat bottom material, g / m2: 750
Floor-type: Book-Type Floor
Bottom type: Inflatable Keel
Transom Type: Reinforced Transom
Transom height, mm: 381, (ft) / S, L · 1,35/S (15″)
Transom thickness, mm: 18
Passenger capacity, people: 3
Loading capacity, kg: 300 (660 lbs)
Recommended motor power, HP: 3.5
Maximum engine power, HP: 5
The standard set includes:
Anchor roller (roller)
Handles for transportation, pcs: 2 on the ends of the cylinders
Paddle length, cm: 140
Oarlocks type: rotary, pin type
Overall weight, kg: 34, (75lb)
Boat bag size, cm: 110 * 55 * 35
Deck bag size, cm: 100 * 60 * 10
Warranty for welded seams, months: 60
Warranty for PVC material, months: 60
ELECTRIC MOTOR SPECIFICATIONS:
Weight: 5 kg (11lbs)
Brushless Motor
Rechargeable Li-ion 18V 14Ah battery
Life Expectancy: 1000 charges
Snap On/Off Remote Controller
Emergency Stop: Magnetic Kill Switch
Running Time: 2.5 Hours ( +4 Hours W/ External Battery)
Charging Time: 4 Hours / 230 V
Levels: 6 forward and backward
Boat Features
- The welded frame of the cylinders is divided into 3 independent pressurized compartments.
- A 9 cm wide rubber protector (teardrop rubbing strake) is glued around the tube.
- A lifeline 8-10 mm thick is mounted around the outer perimeter of the boat.
- Floor-type – book-type floor (4-section) 9 mm thick, wooden boards are connected to each other with PVC strips, 1 piece which folds as a flyer/book.
- A reinforced stationary transom made of marine grade water-resistant plywood 18 mm thick is installed under a certain angle to the cylinders to boost performance. The upper part of the transom is equipped with a protective strip, the sides have special motor-mount planks.
- To transport the boat, 2 handles on the ends of the cylinders may be used.
- The universal towing handle in the bow, made of durable plastic, is used for towing and anchoring the boat.
- A towing ring and anchor roller is used to attach the anchor cable to the bow.
- The boat is equipped with a pressure-control safety valve.
INCLUDED IN Electric Motor BOX
- ThrustMe Kicker outboard
- 110-230V Charger
- Remote control
- Wristband for remote
- Magnetic kill switch
- Safety cord
- Carry Bag
Included in Boat Box
Standard complete package of an inflatable boat (LP-series):
- Two movable seats that are easily adjusted along the entire length of the rails.
- Two detachable aluminum oars – 1.4 meters long.
- Inflatable boat foot pump – 6 liters.
- Small repair kit (PVC patch, glue, valve instrument).
- Operation manual.
- Transporting bag for the boat – 1 pc. (fits in a car trunk)
- Transporting bag for book type floor – 1 pc. (fits in a car trunk